These cupholders fit 1970-1974 E-body and 1971-1974 B-Body cars with a console and automatic transmission.
The drivers side cup holder setup attaches via using one factory screw on the console top plate (see pictures). Remove the screw and install the driver's side cupholder. A small piece of double sided tape is also provided for additional stability. Using the tape is not required but is recommended.
The passenger side cupholder slides into the slot in the drivers side and lays against the contour of the console. A piece of thin foam on the back side of the "strap" prevents the part from scratching the console.
Slots adjacent to cup holders are for holding phones, pens, papers, etc...
The cup holders fit large 4 inch diameter drinks. Snap in the gray inserts with rubber fingers and they fit more standard size drinks (3.5 inch and smaller diameter). The rubber fingers fit typical coffee cups, fountain drinks, bottles of mater / soda, and will keep a standard aluminum can steady.
Check out the video to see how the cupholder inserts snap in / out
We will be checking in the coming weeks to see if we can adapt the design for Manual Shift Cars
Production of these units will begin November 4th, shipments will take 1-2 weeks to complete for the first batch of orders.
"Blems" are sometimes available. These will have cosmetic defects but be 100% functional. Cosmetic defects include slightly rougher surface finish or visible layer lines that do not pass our quality control. These are great candidates for light sanding and painting ... or just use them as is and save a few bucks!
